Securing Refrigeration Controllers After Six New Danfoss Vulnerabilities

Securing Refrigeration Controllers Following Six New Danfoss Vulnerabilities

Anyone who wants to secure their cooling control system now can no longer rely on a firmware update. On November 11, 2026, the Dutch security firm Midnight Blue described six vulnerabilities in the Danfoss AK-SM 800A system controller that allow attackers to take control of the device without logging in. All firmware versions up to and including 5.3.2 are affected. Since mid-October, attackers in several European countries have forced refrigeration units to enter defrost mode via these controllers. IT and technical management teams at grocery store chains, operators of refrigerated and frozen food warehouses, and maintenance staff in food production must now take action.

Short answer

There is no patch for the six new vulnerabilities in the AK-SM 800A. CCB and BSI recommend taking the controllers’ management interface off the Internet and allowing remote access only via VPN. The CCB stresses that this applies even with current firmware and Strict mode enabled. For your company, this means finding and blocking all refrigeration and building controllers with a public address this week. In the coming weeks, a central VPN access for the refrigeration service providers follows, and in 2027 the replacement of older devices that no longer receive updates. In our assessment, temperature monitoring that raises alarms independently of the controller reports an attack in time.

Danfoss controllers and other affected control systems, as of November 17, 2026. Sources: BSI Advisory BITS-H 2026-306525-10e2, CCB November 12, 2026, Midnight Blue 11/2026, CISA ICSA-25-140-03, CERT-FR CERTFR-2026-ALE-012
Control Date What to Do According to the Source
Danfoss AK-SM 800A through 5.3.2 six vulnerabilities exploitable without authentication, no fixed version Remove Internet access; allow remote access only via VPN
Danfoss AK-SM 800A 5.4.0 According to Midnight Blue, the issue has not been resolved; according to the BSI, it cannot be ruled out that systems are affected As noted above, this update does not replace network protection
Danfoss AK-SM 800A prior to R4.2 and 4.3.1 Known vulnerabilities from 2025, including a way to bypass the login process Update to the latest version
Older Danfoss controllers from the AK-SM and AK-SC (CERT-FR) series according to Danfoss, most of the systems attacked in October, no security updates Disconnect from the Internet; replace as a matter of priority
Copeland xweb, Dixell xweb Listed by CERT-FR as having been attacked Disconnect from the Internet; access only via VPN

What Is Known About the Danfoss AK-SM 800A Security Vulnerability

According to its own account, Midnight Blue found six buffer overflows in the freely downloadable firmware within one hour, all of which can be triggered without authentication (Midnight Blue, November 2026). One of these lies in the component that enforces Strict mode, which has been the default setting since firmware version 4.0. CVE numbers have not yet been assigned.

The Center for Cybersecurity Belgium confirmed the findings on November 12. Following an initial wave of attacks in France beginning on October 11, a second wave struck supermarkets and cold storage facilities across Europe starting on November 2 (CCB, November 12, 2026). Since November 13, the BSI has advised users to take accessible devices offline and secure connections to other locations via VPN (BSI, November 13, 2026). According to the BSI, there are no known reports of active exploitation of the six new vulnerabilities. Because the controllers do not use Secure Boot, Midnight Blue states that attackers could plant code that survives a factory reset or render the device permanently inoperable.

Danfoss addressed older vulnerabilities in the AK-SM 800A, including an authentication bypass (CVE-2025-41450), in 2025 with versions R4.2 and 4.3.1 (CISA ICSA-25-140-03). According to Danfoss, the systems that were attacked in October were predominantly older products for which software or security updates are no longer available (tagesschau.de, October 13, 2026).

about 700

of the roughly 10,000 supermarkets in France were affected in mid-October, according to Finance Minister Roland Lescure, figure rounded.

tagesschau.de, October 2026

Cyberattack on Refrigeration Systems: What This Means for Retail Chains and Cold Storage Facilities

In France alone, according to Finance Minister Roland Lescure, about 700 of the roughly 10,000 supermarkets were affected. Since mid-October, such attacks have also targeted refrigeration systems in Germany (tagesschau.de, November 9, 2026). These controllers are part of the refrigeration system, and the service provider often maintains them via its own cellular modem. According to the CCB, such a modem is not considered a security measure as long as the interface remains publicly accessible. Often, the IT department manages point-of-sale systems and inventory control, while facility management handles the controllers. Therefore, the first step is to clarify responsibility.

Model calculation for a retail network with 120 stores and two frozen-food warehouses, all values assumed. According to tagesschau.de, 80 of Coopérative U’s 2,000 stores were affected. If an attack likewise hits four percent of the stores, that is five. If goods worth 20,000 to 40,000 euros spoil per store, the loss of goods amounts to 100,000 to 200,000 euros, not including cleaning and lost sales. For the inventory we estimate 30 to 60 minutes per site, so 8 to 16 person-days for 122 sites. Adding 5 to 8 person-days for the external scan and the access architecture, the estimate comes to 13 to 24 person-days.

Securing Refrigeration Controllers: Your Options, Effort and Risk

Measures for networked refrigeration and building controllers, torck’s own assessment, effort estimated, as of November 17, 2026
Option Effort Costs Risk
Do nothing none None prior to the incident takeover possible without authentication, according to the BSI prolonged outages are likely
Block Internet access; allow only the service provider's addresses Hours per location low According to CERT-FR and CCB, this is only a temporary solution; cellular modems remain a backdoor
Centralized VPN Access for All Service Providers two to four weeks including coordination, estimate medium requires roles, logging, and a responsible entity
Update the firmware to 5.4.0 per device, together with the refrigeration service provider service provider hours according to Midnight Blue, does not close the six vulnerabilities
Replace Old Devices Months; one service window per market high, quote from the refrigeration contractor According to CCB, primarily for devices without updates
Independent Temperature Measurement pilot within weeks, wireless sensors without intervention in the refrigeration system low per cooling station It does not prevent an attack, but in our assessment, it detects it early

How existing equipment is connected to the network in isolation and independently of the manufacturer is shown on our page Plant Monitoring for Existing Facilities.

Which Approach Is Best for What

Blocking access is the step to take this week at every location. We consider it acceptable to grant access to individual service provider addresses only until central access is established. Centralized VPN access is the permanent solution because it manages cooling service providers, building automation, and energy metering through the same controlled entry point with logging.

You plan to replace the old equipment in 2027, starting with the stores that have the highest proportion of frozen goods. Anyone who monitors the cooling system only through the controller that an attacker is currently controlling won’t learn of the attack until the store opens. We therefore recommend using your own temperature sensors that transmit data wirelessly to a separate platform and trigger an alarm at night.

Conflicting Information About Firmware 5.4.0On November 13, the BSI initially reported that version 5.4.0 was not affected, but corrected that statement later that same day. At this time, it cannot be ruled out that version 5.4.0 is affected. Midnight Blue writes that, based on the timestamp, version 5.4.0 was likely built on October 29 and cannot patch the reported vulnerabilities (Cooling Post, November 12, 2026). As of November 17, we had not found a security advisory from Danfoss on the six vulnerabilities. torck does not replace refrigeration systems, your refrigeration contractor handles the device replacement.

Control System Check for Stores and Cold Storage FacilitiesWithin ten business days, you receive a list of all refrigeration and building controllers at your sites with firmware version, support status and reachability from the Internet. In addition, you get an architecture for central VPN access agreed with your refrigeration service provider, and a replacement list. You then decide which sites to switch over immediately and which devices belong in the 2027 budget.

Request a Control System Check

Frequently Asked Questions

Does the Danfoss firmware version 5.4.0 patch the new vulnerabilities?

That remains unclear. Midnight Blue denies it, while the BSI cannot rule out the possibility that devices are affected. Danfoss itself recommends on its download page that the AK-SM 800A not be made directly accessible from the Internet.

How much does it cost to secure the refrigeration controllers?

Blocking access takes hours per site. For the inventory, external scan and access architecture at 120 stores we estimate 13 to 24 person-days, for the central VPN access two to four weeks. The most expensive part is the device replacement by the refrigeration contractor.

What happens if we block the refrigeration service provider's access?

The service provider would then lack access to alerts and maintenance. CCB and CERT-FR therefore recommend reviewing the contract and insurance coverage in advance and setting up a secure fallback solution.

The Next Step

How torck connects existing equipment to the network in isolation is shown on the page Plant Monitoring. The following describes how the production and office networks remain separate: OT-IT Integration in Manufacturing. The process of setting up a dedicated administrative network is illustrated by Separating the management network. For stores, see Remotely Manage Edge Locations. Schedule an Initial Consultation.

The vendor's instructions are authoritative. Test updates in a test environment first.

Questions about this post?

Just a couple of sentences about your situation will suffice. The person responding builds these kinds of systems himself.

We'll respond within one business day.torck · Code mit Drehmoment
Florian Blischke
Managing Director at torck · Over 20 years of software development experience
Florian Blischke is the managing director of torck, based in Maxhütte-Haidhof near Regensburg. He has been working in software development for over 20 years. His focus is custom software, data and AI for industry and retail, ranging from the integration of physical processes and IoT to cloud architecture and data- and AI-driven systems. torck works with its own nearshore team in Rabat. At torck, he oversees projects including the Jouvoli energy platform and the KVM Fleet fleet management product. torck develops software at its locations in Maxhütte-Haidhof, Vienna and Rabat and focuses on software that actually works in operation.

Are you facing the same question?

Since 2017, we have been building software for industry and retail from Maxhütte-Haidhof near Regensburg, with teams in Vienna and Rabat. An initial consultation takes 30 minutes and costs nothing. Afterwards you will know whether the project is worth pursuing, even if the answer is no.

More Articles

Oracle Java License: Pay for a subscription or switch to OpenJDK

Oracle Java License: Pay for a subscription or switch to OpenJDK

On October 8, 2026, Oracle introduced fixed annual prices for the Java SE Universal Subscription for organizations with fewer than 3,000 employees; as of October 20, 2026, new updates for Oracle JDK 21 are covered by the OTN license. When does the subscription pay off, and when should you switch to an OpenJDK build?

Read more »